DSP1000 PRO Novastar
Introducing the DSP1000 PRO, NovaStar’s high-performance all-in-one controller built to elevate any LED display setup. With integrated video processing, 10 Ethernet ports, and support for Video Controller, Fiber Converter, and Bypass modes, it offers exceptional versatility in a compact design.
Driving up to 6.5 million pixels with stunning 4K output, the DSP1000 PRO supports ultra-wide resolutions up to 10,240 px and heights up to 8,192 px, delivering incredible clarity for large or complex LED layouts.
Compatible with a wide range of video sources, it processes high-resolution content with impressive precision-ensuring sharp, vibrant visuals for every application.
- Up to 6 input connectors, including: 1x HDMI 2.0 (IN & LOOP), 2x HDMI 1.3, 1x 10G Optical Fiber Port (OPT1), 1x 3G-SDI (IN & LOOP), 1*USB 3.0 (Play Image or Video saved in a USB Drive)
- Support 6 x layers
- Low latency
- Audio input and output
- Self-adaptive OPT 1 for either video input or sending card output
- Powerful video processing
- Up to 256 user-defined presets supported
- Mosaic input source supported
- Up to 4 units cascaded for image mosaic
- All-round colour adjustment
| Input Connectors | ||
|---|---|---|
| Connector | Qty | Description |
| HDMI 2.0 | 1 |
1x HDMI 2.0 – Max. input resolution: 4096×2160@60Hz – Supported frame rate: 23.98/24/25/29.97/30/47.95/48/50/56/59.94/60/70/71.93/72/75/85/100/119.88/120/144 – Compatible with HDMI 1.4 and HDMI 1.3 video inputs – HDMI 2.0-1 loop out supported – Custom resolutions supported – Max. width: 8192 pixels (8192×1080@60Hz) – Max. height: 8188 pixels (1080×8188@60Hz) – Supports 8-bit/10-bit/12-bit video inputs – Supported color space/sampling rate: RGB 4:4:4 / YCbCr 4:4:4 / YCbCr 4:2:2 – HDCP 1.4 and HDCP 2.2 supported – Accompanied audio support – Does not support interlaced signal inputs |
| HDMI 1.3 | 2 |
2x HDMI 1.3 – Max. input resolution: 1920×1080@60Hz – Supported frame rate: 23.98/24/25/29.97/30/47.95/48/50/56/59.94/60/70/71.93/72/75/85/100/119.88/120 – Custom resolutions supported – Max. width: 2048 pixels (2048×1080@60Hz) – Max. height: 2048 pixels (1080×2048@60Hz) – Supports 8-bit video inputs – HDCP 1.4 supported – Supported color space/sampling rate: RGB 4:4:4 / YCbCr 4:4:4 / YCbCr 4:2:2 – Accompanied audio support – Does not support interlaced signal inputs |
| 3G-SDI | 1 |
1x 3G-SDI – ST-424 (3G), ST-292 (HD) and ST-259 (SD) standard video inputs supported – Supported protocols: SMPTE 259M, SMPTE 274M, SMPTE 296M, SMPTE 425M-A and SMPTE 425M-B – Max. input resolution: 1920×1080@60Hz – 3G-SDI loop output supported – Deinterlacing processing supported – 10-bit video inputs supported – Does not support input resolution and bit depth settings |
| Output Connectors | ||
| Ethernet ports | 10 |
– Max. loading capacity: 6.5 million pixels – Max. width: 10,240 pixels, max. height: 8192 pixels – A single port loading capacity: 650,000 pixels (input bit depth: 8bit) – Supported frame rate: 23.98/24/25/29.97/30/47/48/50/59.94/60/71.93/72/75/85/95/100/119.88/120/144 |
| OPT | 2 |
2x 10G optical fiber ports – OPT 1: Self-adaptive, either for video input or for output – OPT 2: For output with copy and backup modes or loop output – Supports the following three modes: – Input-output: OPT 1 for video input, while OPT 2 copies or backs up output on 10 Ethernet ports – Input-loop: OPT 1 for video input, OPT 2 for loop output – Output: OPT 1 sends output on 10 Ethernet ports, while OPT 2 copies or backs up output on 10 Ethernet ports – Single-mode twin-core optical module: ≤10 km – Multi-mode twin-core optical module: ≤300 m The optical module is not installed at the factory. Please purchase and install it as needed. |
| HDMI 1.3 | 1 |
For monitoring display Output resolution: 1920×1080@60Hz (fixed) |
| 3D | 1 |
1x 3D connector Connect the 3D emitter and use compatible 3D glasses to enjoy a 3D visual experience. When the 3D function is enabled and the video source format is Side-by-Side or Top-and-Bottom, the device output capacity will be halved. |
| Audio Connectors | ||
| AUDIO | 2 |
1x AUDIO input, 1x AUDIO output – 3.5 mm standard audio input and output connectors – Audio sampling rate up to 48 kHz |
| Control Connectors | ||
| ETHERNET | 2 |
– Connect to the PC and log into the Unico web page for device control. – Input or output connector for device cascading Status LEDs: – The top left one indicates the connection status. – On: The port is properly connected. – Flashing: The port is not properly connected, such as loose connection. – Off: The port is not connected. – The top right one indicates the communication status. – On: No data communication. – Flashing: The communication is good, and data is being transmitted. – Off: No data transmission |
| USB | 1 |
1x USB 2.0 – Update firmware via USB drive. – Import or export device logs and EDID files. |
| RS232 | 1 |
3-pin connectors – RX: Receive signals. – TX: Send signals. – G: Ground |
| GENLOCK IN-LOOP | 1 |
Connect to an external sync signal. Accepts bi-level and tri-level signals. – IN: Accept the sync signal. – LOOP: Loop the sync signal. |
| LIGHT SENSOR | 1 | Connect to a light sensor to collect ambient brightness, allowing for automatic screen brightness adjustment. |
WHY CHOOSE US?
Illuminating Your Vision with Unmatched LED Expertise
Our commitment to quality is unwavering. We craft LED displays that are renowned for their exceptional performance and longevity.
We stay at the forefront of LED technology, ensuring you have access to the latest innovations and features.
With a legacy of successful projects and satisfied clients, we bring a wealth of experience to every endeavor.
Our support extends beyond the sale. We’re here to assist you with any inquiries, technical support, and maintenance services.
Latest work Implementations
Explore these showcases to gain insights into the impact of our solutions in real-world applications and discover how we can elevate your operations to new heights. For more details, don’t hesitate to get in touch with our team..
WZ-247, Madipur, Punjabi Bagh West, New Delhi-110063
